NORAD 25544
ISS (ZARYA)
Time
- Local time
- -
- -
Position
- Latitude
- -
- Longitude
- -
- Altitude
- -
Speed
- Miles per hour
- -
- Kilometers per second
- -
- Miles per second
- -
From your location
- Azimuth
- -
- Elevation
- -
- Right ascension
- -
- Declination
- -
- Local sidereal time
- -
Sunlight
- Day / night
- -
Identity
- NORAD ID
- 25544
- International designator
- 1998-067A
- Launch date
- Nov 20, 1998
- Launch site
- TYURATAM MISSILE AND SPACE COMPLEX
- Radar size (RCS)
- Large (over 1 m²)
Radio
- Uplink
- 144.490 MHz · FM145.200 MHz · FM145.825 MHz · AFSK
Show 2 moreShow less
145.990 MHz · FM437.825 MHz · AFSK - Downlink
- 121.100 MHz · FM121.275 MHz · FM121.750 MHz · FM
Show 37 moreShow less
130.167 MHz · FMN137.6257 MHz · CW139.208 MHz · FMN143.625 MHz · FMN145.800 MHz · FM145.800 MHz · SSTV145.825 MHz · AFSK166.000 MHz · FM400.500 MHz · BPSK400.575 MHz · FM414.200 MHz · FSK417.100 MHz · FSK435.400 MHz · FM437.550 MHz · SSTV437.800 MHz · FSK437.800 MHz · SSTV437.800 MHz · FM437.825 MHz · AFSK468.100 MHz · PSK630.128 MHz · FM632.000 MHz · FM637.500 MHz · FM768.975 MHz · FMN922.750 MHz · FM922.763 MHz · CW2,205.500 MHz · BPSK2,213.500 MHz · BPSK2,216.000 MHz · BPSK2,232.500 MHz · GMSK2,265.000 MHz · QPSK2,272.500 MHz · GMSK2,375.000 MHz · FM2,395.000 MHz · DVB-S22,425.000 MHz · FM2,725.000 MHz · AM2,860.000 MHz · AM15,003.400 MHz · QPSK - Beacon
- 922.750 MHz · FM
- Mode
- AFSK, AM, BPSK, CW, DVB-S2, FM, FMN, FSK, GMSK, PSK, QPSK, SSTV
Active transmitters from SatNOGS DB, licensed CC BY-SA 4.0.
Your station
- Grid locator
- -
Live
- Azimuth
- -
- Elevation
- -
- Range
- -
- Range rate
- -
- Naked-eye visibility
- -
- Sub-satellite grid
- -
- Footprint diameter
- -
Upcoming passes
Next 48 h · your local timeUse your location to predict passes.
Mutual visibility
With another station · next 48 hUse your location to find mutual windows.
Transmitters
Nominal · add location for DopplerMode V/U FM - Voice Repeater CTCSS 67.0 Hz
Transceiver · Amateur · FM
- Downlink
- 437.800 MHz
- Uplink
- 145.990 MHz
- CTCSS
- 67.0 Hz
- Baud
- -
Mode U APRS test
Transceiver · Amateur · AFSK
- Downlink
- 437.825 MHz
- Uplink
- 437.825 MHz
- CTCSS
- -
- Baud
- 1,200
Mode V Imaging
Transmitter · Amateur · SSTV
- Downlink
- 145.800 MHz
- CTCSS
- -
- Baud
- -
Recent receptions
SatNOGS Network-
Orbit data
- TLE epoch
- 2026-11-21 18:49:58 UTC
- TLE age
- -
Radio data from SatNOGS DB and SatNOGS Network, licensed CC BY-SA 4.0.
🏁 First sighting race
Arcade →First seen
—
First signal received
—
Nobody yet. Be the first: log it with the button above.
Counted on OrbitNight since launch, from sighting logs with an arcade name.
Its orbit in 3D
Goes round Earth once every 93 minutes, on an orbit tilted 51.6° from the equator, between 414 and 435 km up. Earth is drawn to scale.
Drag to turn · pinch to zoom · it moves live
About ISS (ZARYA)
ISS (ZARYA) is a satellite from Russia (or the former Soviet Union), launched on Nov 20, 1998 from Tyuratam Missile and Space Complex.
It circles Earth every 93 minutes (15.5 times a day), between 413 and 423 km up, on an orbit tilted 51.6° to the equator, so its path covers latitudes up to 52° north and south.
The map shows where it is right now; the pass list tells you when it next comes over your location.
International Space Station · modular space station in low Earth orbit
- Operated by
- Japan Aerospace Exploration Agency, Roscosmos State Corporation, Canadian Space Agency, National Aeronautics and Space Administration, European Space Agency
- Mass
- 419,725 kg
Wikipedia article ↗ · Names and facts: Wikidata (CC0).
Orbit height over the past year
Over the last 365 days its lowest point went from 417 km to 413 km. Sudden rises are engine burns that lift the orbit; slow declines are drag from the thin upper atmosphere.
From Space-Track element sets, one point a day.
Add this to your site
Paste this into a club page or blog: the satellite moving live on a globe, and its next pass over the town you pick.
1. Pick the look
Colours
Night sky matches this site's dark blue; Light suits blogs with a white background.
Pick your town to show when it next passes overhead, or leave it out.
2. Check the preview
It changes as you pick. This is exactly how it will look on your site.
3. Copy the code
Tap the button and the code is copied.
For Notion and other pages that take an address instead of code.
4. Paste it into your site
WordPress, Tistory and most blogs: switch the editor to HTML mode and paste it where you want the widget. Your own site: paste it into the page's HTML. The widget updates itself every day, so you only paste it once.
Step-by-step for each blog
Tistory
- In the post editor, open the mode menu at the top right ("Basic mode") and choose HTML.
- Click where the widget should go and paste the code.
- Switch back to Basic mode to check it, then publish.
- For the sidebar: Manage → Customize → Sidebar → add "HTML banner", paste the code, save.
WordPress
- In the post or page editor, press + and add a "Custom HTML" block.
- Paste the code into the block and press Preview.
- Update or publish.
- For the sidebar: Appearance → Widgets → add "Custom HTML", paste, save.
Blogger
- Layout → Add a Gadget → "HTML/JavaScript".
- Paste the code, save, and drag the gadget where you want it.
- Inside a post: switch the editor to HTML view (pencil icon, top left) and paste.
Notion
- Press "Copy the address only" above.
- In Notion, type /embed, paste the address and press Embed.
- Drag the corners to resize.
Wix · Squarespace
- Add an "Embed code" / "Code" block (Wix: Add → Embed Code → Embed HTML).
- Paste the code and set the box to about 360 × 210.
Your own HTML site
- Open the page's HTML file.
- Paste the code inside <body>, where the widget should appear.
- Upload the file. Done: it updates itself.
Naver Blog
- Naver Blog does not allow outside widgets (iframes), so the code will not show.
- Instead, paste the address as a link: readers tap it and see tonight's sky.
📐 Size: change width="360" and height in the code. It already shrinks to fit on phones.
🔧 Not showing? Check you pasted in HTML mode, not the normal text editor; plain text shows the code itself.